A Superior Method for Constructing Electrical Percolation Network of Nanocomposite Fibers: In Situ Thermally Reduced Silver Nanoparticles

Abstract

Nanocomposite fibers, composed of conductive nanoparticles and polymer matrix, are crucial for wearable electronics. However, the nanoparticle mixing approach results in aggregation and dispersion problems. A revolutionary synthesis method by premixing silver precursor ions (silver ammonium acetate) with polyvinyl alcohol is reported here. The solvation of ions-prevented aggregation, and uniformly distributed silver nanoparticles (in situ AgNPs, 77 nm) are formed after thermal reduction (155 degrees C) without using additional reducing or dispersion agents. The conductive fiber is synthesized by the wet spinning technology. After careful optimization, flower-shaped silver nanoparticles (AgNFs, 350-450 nm) are also employed as cofillers. The addition of in situ AgNPs (9.5 vol%) to AgNFs (30 vol%) increases electrical conductivity by 1434% (2090 to 32 064 S cm(-1)) through the efficient construction of percolation networks. The in situ AgNPs provide significantly higher conductivity compared with other secondary nanoparticle fillers. The gaseous byproducts dramatically increase flexibility with a moderate compromise in tensile strength (55 MPa). The particle-free ion-level uniform mixing of silver precursors, followed by in situ reduction, would be a fundamental paradigm shift in nanocomposite synthesis.© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim